20 yard RoRo skip hire

The 20 yard roll-on roll-off skip is the one to choose when your waste is heavy rather than bulky. Its low sides make it easy to load with a digger or by hand, and it’s built to take dense material like soil, rubble and hardcore.

Get a tailored quote

Priced on haulage plus the weight and type of waste. Send us the details and we’ll come back with a price, and we’ll aim to beat any quote you already have.

20 yard RoRo at a glance

Capacity20 cubic yards (about 15.3m³)
Typical sizeAbout 20ft long, 8ft wide and 4 to 5ft high (6.1m × 2.4m × 1.4m)
Best forSoil, clay, rubble, hardcore, concrete, brick and other heavy waste
Delivered byHook-lift lorry

Exact measurements vary a little between the local firms we work with. If space is tight, tell us and we’ll check the container that will actually be sent.

Why a 20 yard for heavy waste?

Heavy waste fills a skip by weight long before it fills it by volume. A taller container would sit half empty while the lorry reached its weight limit. The 20 yard keeps the load low and spread out, which is safer to transport and means you aren’t paying for space you can’t use.

The low sides also help on site. Excavators can tip straight in, and people loading by wheelbarrow or by hand aren’t lifting over head height.

Jobs it suits

  • Groundworks and excavation: foundations, footings, drainage runs and landscaping spoil.
  • Demolition: brick, block, concrete and hardcore from knocking down walls, outbuildings or garages.
  • Driveway and patio removal: broken slabs, tarmac, sub-base and soil.
  • Site clearance: the heavy first stage of a build before lighter waste starts.

Keeping heavy loads separate

Clean loads of a single material, such as just soil or just hardcore, usually cost less to dispose of than mixed waste, because the material can be recycled directly. If you can keep heavy inert waste separate from general site waste, ask us about pricing the two separately. It often works out cheaper overall.

Need more volume instead?

If your waste is light but bulky, such as timber, plasterboard, packaging or strip-out waste, a 35 yard or 40 yard RoRo will hold far more of it for a similar trip. Not sure which? Send us photos and a rough description and we’ll recommend the right size.

How to book

  1. Tell us about the job: call us or fill in the quote form with the waste type, rough quantity, site postcode and when you need it.
  2. Get your tailored price: we quote on haulage plus the weight and type of waste, so you only pay for what you send.
  3. Delivery and collection: we arrange a slot that suits your programme, including exchanges if you’ll fill more than one.
  4. Recycling: your waste goes to licensed processing sites, where as much as possible is recycled.

Questions

What can’t go in a 20 yard RoRo?

The same items as any skip: asbestos, gas bottles, batteries, tyres, paint, oils and fuels, fridges, mattresses and electricals. If you have asbestos, we can arrange a separate asbestos skip.

How is a RoRo skip priced?

Every RoRo quote is built around your job. It covers delivery and collection (the haulage), plus disposal based on the weight and type of waste. Tell us the waste, roughly how much, and the site postcode, and we’ll send you a tailored price. If you already have a quote from someone else, send it over and we’ll aim to beat it.

How much space does the lorry need?

RoRo skips are delivered by a hook-lift lorry, which rolls the container off the back. It needs a firm, level area about the length of the lorry plus the skip, and clear headroom with no low cables or branches. Send us a photo or a pin of the spot and we’ll confirm it works before booking.

Can you swap it for an empty one when it’s full?

Yes. On most sites we can do an exchange: a full container goes out and an empty one goes in, in the same visit. For ongoing work we can set up regular exchanges so the site never stops.

Need a skip tomorrow? Check your price now.

Call free Get a quote